Jun 01 2013
Here is the current Sketchup 8 file by Jeff. I was able to open it in the Sketchup 13 version. The new version allows you to use the “Pro” features for 8 hours. After that, the application still works but if you want access to the “Pro” stuff you have to buy a license.
Please …
Permanent link to this article: http://unaverz.com/wp/sketchup-file-by-jeff-06-01-13/
Jun 01 2013
Adam came by with some friends to play. The gang attacked the back wall with a grinder and oxy/acet torch until their arms got tired and they ran out if oxygen for the torch.
I decided it was time to run off to grab a plasma torch from Johannes. No great pix, but you …
Permanent link to this article: http://unaverz.com/wp/lets-add-a-plasma-torch/
May 30 2013
Sita says she and a friend may paint a mural on the walls. Figured we better prime them first.
Permanent link to this article: http://unaverz.com/wp/priming-the-walls/
Permanent link to this article: http://unaverz.com/wp/new-lumber-rack/
May 22 2013
Taking off the sides with the torch.
Welder Woman setting stuff on fire!
Click on the image and watch Welder Woman set stuff on fire!
Next we took the back panel off (it was heavy!)
When we left Jeff was busy with the lumber rack. I think the …
Permanent link to this article: http://unaverz.com/wp/welder-woman/
May 21 2013
Thank you so much for your thoughts! You may have just saved the project 🙂
>Some things that would absolutely need to be addressed before the steel thicknesses could be ascertained would be
>1) Maximum allowed load (on both decks!)
Each deck will have at most 50 people. If each weighs an average of 200lbs …
Permanent link to this article: http://unaverz.com/wp/thoughts-for-david/
May 17 2013
Jules and Sita came by for an art meeting. After they left I set to taking down the back steel structure. I decided the best thing to do was use the oxy-acet torch.
Fun stuff.
Permanent link to this article: http://unaverz.com/wp/torch/
May 16 2013
Woot!
Buck tests out our welding machine for the first time.
Jeff demonstrating how to bend pipe.
Permanent link to this article: http://unaverz.com/wp/our-new-table/
May 15 2013
Below is an email exchange between me and Jeff.
—-
From Jeff
Hi Ulan-
At this point, my list is simplified. I’ll be adding more to it later. For now, here’s the basic heavy structural stuff…
Main Structure: (3) 24′ long – 6 x 3 x 11Ga (.120 wall) A500 Steel …
Permanent link to this article: http://unaverz.com/wp/steel-list-and-qs/
May 05 2013
Time to take the top off.
First Jeff is going to build two braces to hold the top. Then we are going to cut across the roof right behind the last remaining wall. At that point, if the whole thing has not fallen, we will cut the roof in sections.
It’s 2 now. …
Permanent link to this article: http://unaverz.com/wp/top-is-coming-off/
