Do we need two more gussets?
When we first built the truck we installed 4 gussets which we attached to two of our 3×3 square tube cross beams.
When our old truck died, FJM cut off the old artwork and migrated it over to the new truck body. Only two gussets remain.
I believe the artwork is held to the frame by a few inches of welds and two gussets. I am concerned that we may twist the artwork off the truck frame.
Should we build and install an additional gusset on the front passenger 3×3 square tube? If so, we need to move the battery compartment first.
Driver’s rear gusset
Passenger rear gusset
Passenger front 3×3 tube
