Jan 27 2015
All dimensions have enough clearance (ie: wiggle room)
30″ from the shaft to the edge of the dance floor (depth) 30″ high from the floor to the ground (height) 74″ from gusset to front (width) 46″ from gusset to rear (width) 31″ from rear tire to rear gusset (width)
The new cabinets can stick out …
Permanent link to this article: http://unaverz.com/wp/can-we-fit-slim-tuba-60s/
Jan 25 2015
After laying out the comb line fabric, I found out this morning that a single person can unload the entire sound system in less than an hour with nothing more than the lift gate and a few dollies. After securing the art, I headed over to our new home at Bridges Storage in Richmond. Keith …
Permanent link to this article: http://unaverz.com/wp/our-new-home-bridges-storage-in-richmond/
Jan 24 2015
We had another great and very full work day down in Monterey. Sheri, Ulan, Wendy, Erich and Madeline worked tirelessly today on the following:
1. Separated the speakers so they can be used at the Valentines Day Party in Oakland.
2. Pad-locks were put on the steel tool boxes that are affixed under the …
Permanent link to this article: http://unaverz.com/wp/another-work-day-in-monterey-jan-24-2015/
Jan 23 2015
Today Erich and I continued the adventure by driving UNAVERZ to Salinas, California where we purchased two new used front tires!!! The old tires will be kept as spares.
We had an adventure as usual. Thankfully we did not lose any pieces of plywood siding as we drove down the highway!! Nothing particularly exciting …
Permanent link to this article: http://unaverz.com/wp/new-used-front-tires-for-unaverz/
Jan 19 2015
We had a wonderful weekend down in Monterey (in Beautiful Corral de Tierra) working together on the UNAVERZ Art Car Lobate. We had a really dedicated group of people come down from SoCal and the Bay area. They slept in our guest room and in our barn and even in our tiny single small person …
Permanent link to this article: http://unaverz.com/wp/unaverz-work-weekend-down-in-monterey-jan-17-18-2015/
Jan 11 2015
Hung out with Libby Schaaf at American Steel tonight. Good Times™. I have hope for Oakland’s future. As one friend said; “Let’s hope this doesn’t turn into another moment like we had with Obama where we thought he would do so much but so little got done.” It does feel a bit like that. We …
Permanent link to this article: http://unaverz.com/wp/libby-made-in-oakland/
Jan 11 2015
Boris installed the new tool cabnet under the truck. Woot woot!!!! It took a lot of hard work. Super appreciate the big effort on that.
Permanent link to this article: http://unaverz.com/wp/boris-joined-us-hes-the-man-jan-11-2015/
Jan 11 2015
Moving right along with the Speaker deck extensions on the speaker side of the car. Erich working diligently to make sure all the welds are solid and stable.
Madeline doing mud flap repair and side door repair, mounting fire extinguisher inside tool box, etc etc!!
Permanent link to this article: http://unaverz.com/wp/moving-right-along-on-jan-11-2015/
Jan 10 2015
Erich welding deck extensions for the speakers for Burning Man 2015
Madeline working on Moop Lip and garment hangers on the back of the bar upstairs.
Permanent link to this article: http://unaverz.com/wp/working-hard/
Permanent link to this article: http://unaverz.com/wp/progress-jan-09/
